With 15" Wheel

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Apply a thin coat of Molykote M7439 to pad clip.

Fig 1: Locating Molykote M7439 Applying Point
Courtesy of SUBARU OF AMERICA, INC.
Apply a thin coat of Molykote AS880N (Part No. K0779YA010) to the frictional portion between pad and pad inner shim.

Fig 2: Locating Molykote AS880N Applying Point (1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.
Apply a thin coat of Molykote AS880N (Part No. K0779YA010) to the three frictional portions between inner shim and outer shim of outer pads.

Fig 3: Locating Molykote AS880N Applying Point (2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.
Install the pad on support.
Install the caliper body on support.

Tightening torque:

27 N.m (2.8 kgf-m, 19.9 ft-lb)