Section 133 (Exhaust System (H6DO)): Muffler: Installation

WARNING: This page is about a different car, the 2007 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

NOTE: Use a new gasket and self-locking nut.

Tightening torque:

48 N.m (4.9 kgf-m, 35.4 ft-lb)

LH side

Fig 1: Locating Muffler Bolts (LH)
Courtesy of SUBARU OF AMERICA, INC.
RH side

Fig 2: Locating Muffler Bolts (RH)
Courtesy of SUBARU OF AMERICA, INC.