Special Tool

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

SPECIAL TOOL

ILLUSTRATION	TOOL NUMBER	DESCRIPTION	REMARKS
Courtesy of SUBARU OF AMERICA, INC.	398477701	HANDLE	Used for installing the front and rear bearing cones.
Courtesy of SUBARU OF AMERICA, INC.	398477702	DRIFT	Used for press-fitting the bearing cone of differential carrier (front). For T-type
Courtesy of SUBARU OF AMERICA, INC.	398217700	ATTACHMENT SET	Stand for rear differential carrier disassembly and assembly.
Courtesy of SUBARU OF AMERICA, INC.	498447120	INSTALLER	Used for installing the front oil seal.
Courtesy of SUBARU OF AMERICA, INC.	498427200	FLANGE WRENCH	Used for stopping rotation of companion flange when removing and tightening self-lock nut.
Courtesy of SUBARU OF AMERICA, INC.	398467700	DRIFT	Used for removing pinion, pilot bearing and front bearing cone. For T-type and VA1 -type
Courtesy of SUBARU OF AMERICA, INC.	399780104	WEIGHT	Used for installing the front bearing cone and the pilot bearing companion flange.
Courtesy of SUBARU OF AMERICA, INC.	899580100	INSTALLER	Used for press-fitting the front bearing cone and pilot bearing.
Courtesy of SUBARU OF AMERICA, INC.	899904100	STRAIGHT PIN REMOVER	Used for driving out differential pinion shaft lock pin.
Courtesy of SUBARU OF AMERICA, INC.	498247001	MAGNET BASE	Used for measuring backlash between side gear and pinion, and hypoid gear. Used together with the DIAL GAUGE (498247100).
Courtesy of SUBARU OF AMERICA, INC.	498247100	DIAL GAUGE	Used for measuring backlash between side gear and pinion, and hypoid gear. Used together with the MAGNET BASE (498247001).
Courtesy of SUBARU OF AMERICA, INC.	398507704	BLOCK	Used for adjusting pinion height and preload. For T-type and VA1 -type
Courtesy of SUBARU OF AMERICA, INC.	398177700	INSTALLER	Used for installing the rear bearing cone. For T-type and VA2-type
Courtesy of SUBARU OF AMERICA, INC.	398457700	ATTACHMENT	Used for removing the side bearing retainer. For T-type
Courtesy of SUBARU OF AMERICA, INC.	398477703	DRIFT 2	Used for press-fitting bearing race (rear) of differential carrier. For T-type and VA2-type
Courtesy of SUBARU OF AMERICA, INC.	398437700	DRIFT	Used for installing the side oil seal. For T-type and VA2-type
Courtesy of SUBARU OF AMERICA, INC.	398507702	DUMMY SHAFT	Used for adjusting pinion height and preload. For T-type
Courtesy of SUBARU OF AMERICA, INC.	398507703	DUMMY COLLAR	Used for adjusting pinion height and preload. For T-type
Courtesy of SUBARU OF AMERICA, INC.	398517700	REPLACER	Used for removing rear bearing cone. For T-type and VA2-type
Courtesy of SUBARU OF AMERICA, INC.	398487700	DRIFT	Used for press-fitting side bearing cone. For T-type and VA2-type
Courtesy of SUBARU OF AMERICA, INC.	398507701	DIFFERENTIAL CARRIER GAUGE	Used for adjusting pinion height. For T-type
Courtesy of SUBARU OF AMERICA, INC.	398527700	PULLER ASSY	Used for removing front oil seal. Used for removing side bearing cup. (T-type)
Courtesy of SUBARU OF AMERICA, INC.	28099PA090	OIL SEAL PROTECTOR	Used for installing the rear drive shaft to the rear differential. For oil seal protection
Courtesy of SUBARU OF AMERICA, INC.	28099PA100	DRIVE SHAFT REMOVER	Used for removing the rear drive shaft from rear differential. For T-type
Courtesy of SUBARU OF AMERICA, INC.	399703600	PULLER ASSY	Used for removing companion flange.
Courtesy of SUBARU OF AMERICA, INC.	899874100	INSTALLER	Used for installing the companion flange.
Courtesy of SUBARU OF AMERICA, INC.	498077000	REMOVER	Used for removing the differential side bearing cone. For VA2-type
Courtesy of SUBARU OF AMERICA, INC.	899864100	REMOVER	Used for removing the differential side bearing.
Courtesy of SUBARU OF AMERICA, INC.	499277200	INSTALLER	Used for installing the front bearing cone. For VA2-type
Courtesy of SUBARU OF AMERICA, INC.	18758AA000	PULLER	Used for removing side bearing cup. For VA2-type
Courtesy of SUBARU OF AMERICA, INC.	18759AA000	PULLER ASSY	Used for removing the differential side bearing cone. For T-type
Courtesy of SUBARU OF AMERICA, INC.	18678AA000	DUMMY SHAFT	Used for adjusting pinion height and preload. For VA2-type
Courtesy of SUBARU OF AMERICA, INC.	18831AA010	DIFFERENTIAL CARRIER GAUGE	Used for adjusting pinion height. For VA2-type
Courtesy of SUBARU OF AMERICA, INC.	18630AA010	WRENCH ASSY	Used for removing and installing the side oil seal holder. For VA2-type NOTE: Also available for VA1 -type.
Courtesy of SUBARU OF AMERICA, INC.	498175500	INSTALLER	Used for installing the rear bearing cone. For VA1-type
Courtesy of SUBARU OF AMERICA, INC.	499785500	WRENCH ASSY	Used for removing and installing the side oil seal holder. For VA1-type
Courtesy of SUBARU OF AMERICA, INC.	498447100	INSTALLER	Used for installing the oil seal. For VA1-type and T-type
Courtesy of SUBARU OF AMERICA, INC.	399520105	SEAT	Used for removing the side bearing cone. Used together with the PULLER SET (899524100). For VA-type
Courtesy of SUBARU OF AMERICA, INC.	498485400	DRIFT	Used for installing side bearing cone. For VA1-type
Courtesy of SUBARU OF AMERICA, INC.	498505501	DIFFERENTIAL CARRIER GAUGE	Used for adjusting pinion height. For VA1 -type
Courtesy of SUBARU OF AMERICA, INC.	498447110	DRIFT	Used for press-fitting the bearing race (front) of the differential carrier. For VA1-type
Courtesy of SUBARU OF AMERICA, INC.	498447150	DUMMY SHAFT	Used for adjusting pinion height and preload. For VA1 -type
Courtesy of SUBARU OF AMERICA, INC.	899524100	PULLER SET	Used for removing the differential side bearing cone. Puller Cap
Courtesy of SUBARU OF AMERICA, INC.	498515500	REPLACER	Used for removing rear bearing cone. For VA1 -type
Courtesy of SUBARU OF AMERICA, INC.	32285AA000	DUMMY COLLAR	Used for adjusting pinion height and preload. For VA1-type
Courtesy of SUBARU OF AMERICA, INC.	499705404	SEAT	Used for removing the side bearing race. Used together with PULLER ASSY (499705401). For VA1-type
Courtesy of SUBARU OF AMERICA, INC.	499705401	PULLER ASSY	Used for removing the side bearing race. Used together with SEAT (499705404). For VA-type