LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 117 (Lighting System) >> Ignition Switch Illumination >> Removal

Ignition Switch Illumination: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the screws, and detach the upper column cover and lower column cover.
    Fig 1: Locating Screws
    G05022834Courtesy of SUBARU OF AMERICA, INC.
  3. Disconnect the ignition switch illumination connector (A).
  4. Turn the ignition switch illumination connector to the left and disconnect it.
    Fig 2: Turning Ignition Switch Illumination Connector
    G05344017Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals