LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 107 (Power Steering System) >> Universal Joint >> Inspection

Universal Joint: Inspection

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Check for wear, damage or any other faults. Replace as necessary.

Service limit: 

Universal joint play: 0 mm (0 in) 

Maximum swing torque: 0.3 N (0.03 kgf, 0.07 lb) 

Fig 1: Checking For Wear, Damage Or Any Other Faults
G05343505Courtesy of SUBARU OF AMERICA, INC.

Measure the swing torque of universal joint.

Service limit : Maximum load: 3.8 N (0.39 kgf, 0.86 lb) or less 

Fig 2: Measuring Swing Torque Of Universal Joint (Yoke (Gear Box Side))
G05343506Courtesy of SUBARU OF AMERICA, INC.

Service limit : Maximum load: 3.8 N (0.39 kgf, 0.86 lb) or less 

Fig 3: Measuring Swing Torque Of Universal Joint (Yoke (Gear Box Side))
G05343507Courtesy of SUBARU OF AMERICA, INC.

Service limit: Maximum load: 7.3 N (0.74 kgf, 1.64 lb) or less 

Fig 4: Measuring Swing Torque Of Universal Joint (Yoke (Gear Steering Column Side))
G05343508Courtesy of SUBARU OF AMERICA, INC.

Service limit: Maximum load: 7.3 N (0.74 kgf, 1.64 lb) or less 

Fig 5: Measuring Swing Torque Of Universal Joint (Yoke (Gear Steering Column Side))
G05343509Courtesy of SUBARU OF AMERICA, INC.