LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - Engine (Diagnostics) (H4SO) >> Diagnostic Procedure with Diagnostic Trouble Code (DTC) >> DTC P0464 Fuel Level Sensor Circuit Intermittent >> DTC Detecting Condition

DTC P0464 Fuel Level Sensor Circuit Intermittent: DTC Detecting Condition

CAUTION: After repairing or replacing the defective part, perform the Clear Memory Mode <Ref. to OPERATION , Clear Memory Mode .> and Inspection Mode <Ref. to PROCEDURE , Inspection Mode .>.
DIAGNOSTIC PROCEDURE CHART

Step Check Yes No
1 CHECK FOR ANY OTHER DTC ON DISPLAY.  Is DTC P0464 displayed on the display? Check the combination meter. <Ref. to CHECK FUEL LEVEL SENSOR , INSPECTION, Combination Meter System .> Even if the malfunction indicator light illuminates, the circuit has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again.
NOTE: In this case, temporary poor contact of connector may be the cause.