LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Diagnostic Trouble Code (DTC) Detecting Criteria (H4SO) >> Diagnostic Trouble Code (DTC) Detecting Criteria >> DTC P0607 Control Module Performance >> Diagnostic Method >> Judgment Value

Judgment Value

MALFUNCTION CRITERIA AND THRESHOLD VALUE REFERENCE

Malfunction Criteria Threshold Value
(1) Difference of CPU reading value of the throttle position sensor signal ≤ 0.0858 V
(2) Difference of CPU read value of the accelerator pedal position sensor signal ≤ 0.35 V
(3) WD pulse from sub CPU WD pulse occur
(4) Communication between CPU Possible to communicate
(5) |Throttle position sensor 1 opening angle - (Throttle position sensor 1 opening angle after passing amplifier) 1/4| < 3°
(6) Cruise control cancel signal at brake ON Cruise control cancel signal ON
(7) Brake switch 1, 2 signal SW 1 and 2 are matched

Time Needed for Diagnosis: 

  1. 600 milliseconds
  2. 830 milliseconds
  3. 200 milliseconds
  4. 200 milliseconds
  5. 24 milliseconds
  6. 250 milliseconds
  7. 200 milliseconds

Malfunction Indicator Light Illumination:  Illuminates as soon as a malfunction occurs.