LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Abs - Vehicle Dynamics Control (VDC) System (Diagnostics) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

  1. On the «Main Menu» display screen, select the {2. Each System Check}.
  2. On the «System Selection Menu» display screen, select the {Brake Control}.
  3. Select the [OK] after {VDC} is displayed.
  4. On the «Brake Control Diagnosis» display screen, select the {Clear Memory}.
    BRAKE CONTROL DIAGNOSIS DISPLAY SCREEN REFERENCE

    Display Contents to be monitored
    Clear Memory? DTC deleting function
  5. When "Done" and 'Turn ignition switch to OFF" are shown on the display screen, turn the ignition switch to OFF and close the Subaru Select Monitor.
    NOTE: For details concerning operation procedures, refer to the "SUBARU SELECT MONITOR OPERATION MANUAL".
scientia non olet · About LEMON Manuals