LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> LAN Communication System - LAN System (Diagnostics) >> Subaru Select Monitor >> Operation >> Read Current Data

Read Current Data

  1. On the «Main Menu» display screen, select the {Each System Check}.
  2. On the «System Selection Menu» display screen, select the {Integ. Unit mode}.
  3. On the «Integ. Unit mode failure diag» display screen, select the {Current Data Display & Save}.
  4. On the «Current Data Display & Save» display screen, select the {12 Data Display}.
  5. Using the scroll key, scroll the display screen up or down until the desired data is shown.

    A support list contains both of analog and digital data, and they are shown in the following table.

scientia non olet · About LEMON Manuals