LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (4AT) >> Reduction Drive Gear >> Removal

Reduction Drive Gear: Removal

  1. Remove the transmission assembly from vehicle body. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Remove the rear wheel speed sensor, and separate the extension case from transmission case. < Ref. to REMOVAL , Extension Case. >
  3. Remove the reduction driven gear. < Ref. to REMOVAL , Reduction Driven Gear. >
  4. Using the ST, extract the reduction drive gear assembly.

    ST1 499737100 PULLER

    ST2 899524100 PULLER SET

    Fig 1: Identifying Puller Set And Puller
    G05668407Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals