LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (4AT) >> Reduction Drive Gear >> Disassembly

Reduction Drive Gear: Disassembly

  1. Take out the seal ring.
    Fig 1: Identifying Reduction Drive Shaft And Seal Ring
    G05668409Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the ball bearing using ST.

    ST 498077600 REMOVER

    Fig 2: Identifying Ball Bearing And Reduction Drive Gear
    G05668410Courtesy of SUBARU OF AMERICA, INC.
  3. Apply vaseline to the outer surface of seal ring and shaft groove.
    Fig 3: Identifying Reduction Drive Gear
    G05668411Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals