LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission (4AT) >> Rear Drive Shaft >> Installation

Rear Drive Shaft: Installation

  1. Select shims. < Ref. to VTD MODEL , Transfer Clutch. >
  2. Install drive plate and driven plate.
  3. Insert the rear drive shaft into the center differential assembly.
  4. Join the transmission case and the extension case, and then install the rear vehicle speed sensor. < Ref. to INSTALLATION , Extension Case. >
  5. Install the transmission assembly to the vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly. >
scientia non olet · About LEMON Manuals