LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Rear Suspension System >> Rear Arm >> Assembly >> Rear Bushing

Rear Bushing

  1. Insert the bushing into the bore of ST D.
  2. Set the ST C, ST D and bearing puller in the specified positions as shown in the figure, and then press-fit the bushing until the outer end of bushing and rear end of rear arm is flat.

    ST C 20099AE040 INSTALLER & REMOVER SET

    ST D 20099AE040 INSTALLER & REMOVER SET

    Fig 1: Pressing Bushing Into Trailing Link
    G05342896Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals