SI-DRIVE Selector: Inspection

WARNING: This page is about a different variant/trim than selected.

Measure the resistance between SI-DRIVE selector terminals.

Fig 1: Measuring Resistance Between SI-DRIVE Selector Terminals

Courtesy of SUBARU OF AMERICA, INC.

RESISTANCE SPECIFICATION

Switch position	Terminal No.	Standard
Sport (when turning the SI-DRIVE selector to the left)	2 and 3	Less than 10 Ω
Intelligent (when pushing the SI-DRIVE selector)		0.8 - 1.2 kΩ
Sport Sharp (when turning the SI-DRIVE selector to the right)		2.14 - 3.2 kΩ