Clutch Switch: Adjustment

WARNING: This page is about a different variant/trim than selected.

Loosen the lock nut of clutch switch (clutch start).

Fig 1: Identifying Lock Nut Of Clutch Switch (Clutch Start)
Courtesy of SUBARU OF AMERICA, INC.
Fully depress the clutch and hold it.
Adjust the gap of the clutch pedal plate and the clutch switch to be 2 - 2.5 mm (0.08 - 0.10 in).

Fig 2: Identifying Gap Between Clutch Pedal Plate And Clutch Switch
Courtesy of SUBARU OF AMERICA, INC.
Tighten the lock nut.
Tightening torque:

8 N.m (0.8 kgf-m, 5.8 ft-lb)