LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 14 (Clutch System) >> Clutch Pedal >> Assembly

Clutch Pedal: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Temporarily assemble the clutch switch, etc. to pedal bracket.
  2. Clean the clutch pedal and brake pedal bushing holes, apply a thin coat of grease, and install the bushings.
  3. Align the holes of the pedal bracket, clutch pedal and brake pedal, and install the brake pedal return spring, assist rod, spring and bushing.
    NOTE: Clean the inside of bushings and apply a thin coat of grease before installing the spacer.
scientia non olet · About LEMON Manuals