LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (Instrumentation/Driver Info) >> Clock System >> Inspection >> Check Illumination Circuit

Check Illumination Circuit

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
DIAGNOSTIC PROCEDURE CHART

Step Check Yes No
1 CHECK ILLUMINATION CIRCUIT POWER SUPPLY. 
  1. Turn the ignition switch to OFF.
  2. Disconnect the clock harness connector.
  3. Turn the ignition switch and lighting switch to ON.
  4. Measure the voltage between the clock harness connector and chassis ground.

    Connector & terminal 

    Normal meter: 

    (i59) No. 1 (+) - Chassis ground (-): 

 Is the voltage 10 V or more? Replace the clock body. Check the harness for a open or short between the fuse and clock.
scientia non olet · About LEMON Manuals