LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Intake System (Induction) (H4DOTC)) >> Intake Duct >> Removal

Intake Duct: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the collector cover.
  2. Disconnect the ground cable from the battery.
    Fig 1: Disconnecting Ground Cable And Battery
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the intake manifold. <Ref. to REMOVAL .>
  4. Remove the sensor, engine harness and fuel pipe attached to the intake manifold. <Ref. to DISASSEMBLY .>
  5. Remove the intake duct from intake manifold.
    Fig 2: Identifying Intake Duct And Intake Manifold
    G05340349Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals