Electronic Throttle Control Relay: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from the battery.

Fig 1: Identifying Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Remove the glove box. <Ref. to REMOVAL , Glove Box .>
Remove the harness cover (A).

Fig 2: Identifying Harness Cover
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from electric throttle control relay.

Fig 3: Locating Connector From Electric Throttle Control Relay
Courtesy of SUBARU OF AMERICA, INC.