LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Power Assisted System (Power Steering)) >> Tilt Steering Column >> Assembly

Tilt Steering Column: Assembly

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Insert the combination switch to the upper column shaft, and install the upper column cover. Then route the ignition key harness and combination switch harness between column cover mounting bosses.

Tightening torque: 

1.2 N.m (0.12 kgf-m, 0.9 ft-lb) 

CAUTION: Do not over torque the screw.
scientia non olet · About LEMON Manuals