Front Crossmember Support Plate: Installation
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal.
NOTE:
Tighten the small type crossmember support plate together with stabilizer bracket.
After installing the stabilizer bracket to crossmember, tighten the crossmember support plate together.
Tightening torque:
Crossmember support plate:
60 N.m (6.1 kgf-m, 44.3 ft-lb)
Crossmember support plate (Joint tightening portion of stabilizer bracket):
25 N.m (2.5 kgf-m, 18.1 ft-lb)
Jack-up plate:
60 N.m (6.1 kgf-m, 44.3 ft-lb)