LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Lighting System) >> High-mounted Stop Light >> Removal >> Sedan Model

Sedan Model

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Push the high-mounted stop light towards the rear of the vehicle (1), raise the rear end (2) and remove the clips to remove the stop light
    Fig 1: Pushing High-Mounted Stop Light Towards Rear Of Vehicle
    G05022497
  3. Remove the harness from the clamp.
    Fig 2: Removing Harness From Clamp
    G05022498
  4. Disengage two claws (A), pull out the high-mounted stop light from the cover and remove claw (B).
    Fig 3: Identifying High-Mounted Stop Light Claw
    G05022499
  5. Disengage the three claws and remove lens (A).
    Fig 4: Locating Claws And Lens
    G05022500
  6. Remove the bulb.
scientia non olet · About LEMON Manuals