LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Lighting System) >> High-mounted Stop Light >> Inspection >> Wagon Model

Wagon Model

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the high-mounted stop light to test if it illuminates normally.
  2. If the high-mounted stop light does not illuminate, replace it with a new part.
    NOTE: Since LED (Light Emitting Diodes) is used for the high-mounted stop light of the wagon model, replace the high-mounted stop light as an assembly when the LED burns out.
scientia non olet · About LEMON Manuals