Front Turn Signal Light Bulb: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

When removing the turn signal light bulb, fully turn the steering wheels to opposite direction from the turn signal light bulb to remove.

Fig 1: Identifying Front Turn Signal Light And Mud Guard
Turn the mud guard inward.
Turn socket (A) from the wheel arch, and remove the front turn signal light bulb.

Fig 2: Turning Socket From Wheel Arch

CAUTION: ON the 5AT model, the turn signal light bulb LH cannot be removed from the wheel arch. Remove the bulb from the engine compartment, by removing the battery.