LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 56 (Lighting System) >> Combination Switch (Light) >> Removal

Combination Switch (Light): Removal

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from battery.
  2. Remove the screws and remove the steering column covers (upper and lower).
    Fig 1: Locating Steering Column Covers Screws
    G05022834
  3. Disconnect the connector from combination switch.
  4. Remove the screws which secure the switch, then remove the combination switch.
    Fig 2: Locating Combination Switch Screws
    G05022457
scientia non olet · About LEMON Manuals