LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 21 (Clutch System) >> Master Cylinder >> Disassembly

Master Cylinder: Disassembly

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the straight pin and reservoir tank.
    Fig 1: Identifying Straight Pin And Reservoir Tank
    G05020134
  2. Remove the oil seal.
    Fig 2: Identifying Oil Seal
    G05020135
  3. Move the cylinder boot towards the rear.
    Fig 3: Moving Cylinder Boot
    G05020136
  4. Remove the snap ring.
    CAUTION: Be careful when removing the snap ring, to prevent the rod, washer, piston and return spring from flying out.
  5. Remove the clutch damper.
scientia non olet · About LEMON Manuals