LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Automatic Transmission 4AT) >> Torque Converter Assembly >> Removal

Torque Converter Assembly: Removal

WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission assembly from vehicle body. < Ref. to REMOVAL , Automatic Transmission Assembly. >
  2. Pull out the torque converter assembly and oil pump shaft horizontally.
    NOTE: Be sure not to scratch the inside of bushing in oil pump shaft.
    Fig 1: Identifying Torque Converter Clutch And Oil Pump Shaft
    G05002574Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the input shaft.
    NOTE: When the torque converter assembly is removed, the input shaft will also come off.
    Fig 2: Identifying Input Shaft
    G05002575Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the oil pump shaft from torque converter assembly as necessary.
scientia non olet · About LEMON Manuals