Condition Check
WARNING: This page is about a different car, the 2006 Subaru Outback and 2006 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When replacing ATF, check the inside condition of the transmission body by inspecting the drained ATF.
ATF SPECIFICATIONS
| Fluid condition | Trouble and possible cause | Corrective action |
|---|---|---|
| Large amount of metallic pieces are found. | Excessive wear of the internal of the transmission body. | Replace ATF and check if AT operates correctly. |
| Thick and varnish-form fluid. | Burned clutch, etc. | Replace ATF and check the AT body or vehicle for faulty. |
| Clouded fluid or bubbles are found in fluid. | Water mixed in fluid. | Replace ATF and check the water entering point. |