LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Lighting System) >> Ignition Switch Illumination >> Removal

Ignition Switch Illumination: Removal

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from the battery.
  2. Remove the screws, and detach the upper column cover and lower column cover.
    Fig 1: Locating Steering Column Covers Screw
    G05663714Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the instrument panel lower cover. <Ref. to REMOVAL , Instrument Panel Lower Cover . >
  4. Disconnect the ignition switch illumination connector (A).
  5. Turn the ignition switch illumination connector to the left and disconnect it.
Fig 2: Turning Ignition Switch
G05663505Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals