Function Check

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

In order to check the body integrated unit function, inspect the body integrated unit and actuator using Subaru Select Monitor without operating switches.

On the «Main Menu» display screen, select the {Each System Check}.
On the «System Selection Menu» display screen, select the {Integ. Unit mode}.
On the «Integ. unit mode failure diag» display screen, select the {Function Check}.
Select the item to be operated on the «Function Check» display screen with «UP/Down key» and press the [Next] button.

Fig 1: Function Check Procedure
Courtesy of SUBARU OF AMERICA, INC.
Pressing [Next] starts, [End] cancels the operation and [OK] returns to the System Operation Check Mode display screen.

NOTE: If not equipped (based on area or condition), process will not go on.