LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 182 (LAN Communication System - LAN System (Diagnostics)) >> Subaru Select Monitor >> Operation >> Clear Memory Mode

Clear Memory Mode

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the «Main Menu» display screen, select the {2. Each System Check}.
  2. On the «System Selection Menu» display screen, select the {Integ. Unit mode}.
  3. Press the [OK] key after the information of body integrated unit type is displayed.
  4. On the «Integ. Unit mode failure diag» display screen, select {Clear Memory} and press the [OK] key.
    CLEAR MEMORY MODE

    Display Contents to be monitored
    Clear Memory? Clear function of DTC and freeze frame data
  5. When "Done" is shown on the display screen, turn the ignition switch to OFF.
NOTE: For details concerning the operation procedure, refer to the help file on PC application for Subaru Select Monitor.
scientia non olet · About LEMON Manuals