LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Clutch System) >> Master Cylinder >> Disassembly

Master Cylinder: Disassembly

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the straight pin and reservoir tank.
    Fig 1: Identifying Straight Pin And Reservoir Tank
    G05662312Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the oil seal.
    Fig 2: Identifying Oil Seal And Master Cylinder
    G05662313Courtesy of SUBARU OF AMERICA, INC.
  3. Move the seat towards the rear.
    Fig 3: Moving Seat Towards Rear
    G05662314Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the piston stop ring.
    CAUTION: When removing the piston stop ring, be careful to prevent the rod, washer, piston and return spring from coming out.
  5. Remove the clutch damper.
scientia non olet · About LEMON Manuals