Section 160 (Rear Suspension System): General Description: Specification

WARNING: This page is about a different car, the 2008 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

For rear suspension specifications. <Ref. to SPECIFICATION , General Description . >

NOTE:

Front and rear toe-in and front camber can be adjusted. Adjust if the toe-in or camber tolerance exceeds specifications.
Other items indicated in the specifications table cannot be adjusted. If other items exceed specifications, check the suspension parts and connections for deformation. If defective, replace with new parts.

Fig 1: Identifying Front Toe-In Angle

Courtesy of SUBARU OF AMERICA, INC.