LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 143 (Sunroof System) >> Glass Lid >> Forced Drive >> Wagon Model

Wagon Model

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Slide the slider (A) towards the rear of the vehicle (C), and remove the sun shade from the slider by raising the rod (B).
    Fig 1: Removing Sun Shade From Slider
    G05022844Courtesy of SUBARU OF AMERICA, INC.
    CAUTION: Be careful not to damage the adjacent parts with the rod end when moving the glass lid with the hexagon wrench.
  2. Slide the sunshade forward.
  3. Remove the plug to the rear of the roof trim.
    Fig 2: Removing Plug
    G05022845Courtesy of SUBARU OF AMERICA, INC.
  4. Insert the hexagon wrench securely until it touches the motor shaft edge.
  5. Turn the wrench to right, and close the glass lid (front and rear).
    Fig 3: Removing Glass Lid (Wagon Model)
    G05022846Courtesy of SUBARU OF AMERICA, INC.
    CAUTION: After a forced operation, make sure to perform an initialize operation. < Ref. to INSPECTION , Sunroof Control System. >