LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Glass/Windows/Mirrors) >> Wiper Deicer Switch >> Inspection >> Check With SUBARU Select Monitor

Check With SUBARU Select Monitor

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Check whether the wiper deicer timer is in initial setting or customize setting before performing inspection.
DIAGNOSTIC PROCEDURE CHART

Step Check Yes No
1 CHECK INPUT SIGNAL TO BODY INTEGRATED UNIT. 
Check the input signal when the wiper deicer switch is operated using Subaru Select Monitor.
  1. Connect the Subaru Select Monitor to the data link connector.
  2. Turn the ignition switch to ON.
  3. Select {Integ. unit} from the «main menu».
  4. Select the {Current Data Display & Save}.
  5. Check the input signal when the wiper deicer switch is set to ON.
 After the wiper deicer switch is set to ON, does it turn to OFF in 15 minutes? Or does it operate continuously? END. Replace the body integrated unit. < Ref. to REMOVAL , Body Integrated Unit. >
scientia non olet · About LEMON Manuals