Rear Regulator and Motor Assembly: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Remove the rear door glass. < Ref. to REMOVAL , Rear Door Glass. >
Remove the nut (A) to remove the front sash.

Fig 1: Identifying Front Sash Nut
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the motor connector.
Remove the four bolts and two nuts to remove regulator assembly.

Fig 2: Locating Regulator Assembly Nuts And Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove the screws to remove motor assembly.

Fig 3: Locating Motor Assembly Screws
Courtesy of SUBARU OF AMERICA, INC.