Extension Case: Installation

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Attach the selected reduction driven gear shim to end surface of reduction driven gear with Vaseline. < Ref. to ADJUSTMENT , Reduction Driven Gear. >
Install the extension case.
NOTE: Use a new gasket.

Tightening torque: 25 N.m (2.5 kgf-m, 18 ft-lb)

Fig 1: Identifying Extension Case
Courtesy of SUBARU OF AMERICA, INC.
Install the rear vehicle speed sensor.
Tightening torque: 7 N.m (0.7 kgf-m, 5.2 ft-lb)

Fig 2: Identifying Rear Vehicle Speed Sensor
Courtesy of SUBARU OF AMERICA, INC.
Install the transmission assembly.
< Ref. to INSTALLATION , Automatic Transmission Assembly. >