LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 135 (Automatic Transmission (5AT)) >> Extension Case >> Assembly

Extension Case: Assembly

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Press-fit the new oil seal using ST and the press.

    ST 498057300 INSTALLER

  2. Press-fit the dust cover.
  3. Insert the transfer clutch assembly, spring retainer, return spring and clutch spring retainer.
    Fig 1: Identifying Transfer Clutch Assembly, Spring Retainer And Return Spring
    G05022297Courtesy of SUBARU OF AMERICA, INC.
  4. Using the ST and compressor, install the snap ring.

    ST 18762AA000 COMPRESSOR SPECIAL TOOL

    Fig 2: Identifying Snap Ring With ST And Press
    G05022295Courtesy of SUBARU OF AMERICA, INC.
  5. Install the transfer clutch. < Ref. to INSTALLATION , Transfer Clutch. >
  6. Install the multi-plate hub assembly.
scientia non olet · About LEMON Manuals