LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (A/T Control Systems) >> AT Steering Shift Switch >> Removal

AT Steering Shift Switch: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the ground cable from the battery.
  2. Set the tire to the straight-ahead position.
  3. Remove the airbag module. <Ref. to REMOVAL , Driver's Airbag Module .>
    WARNING: If airbag modules are mounted, always refer to "Airbag System" when performing airbag module service. <Ref. to INSPECTION , Driver's Airbag Module .>
  4. Remove the steering wheel. <Ref. to REMOVAL , Steering Wheel .>
  5. Remove the cover from steering wheel.
  6. Remove the AT steering shift switch mounting screws from the left and right side, one on each side.
    Fig 1: Locating AT Steering Shift Switch Mounting Screws
    G05019703Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the steering shift switch.
scientia non olet · About LEMON Manuals