LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs - Vehicle Dynamics Control (VDC) System (Diagnostics) >> Subaru Select Monitor >> Operation >> Parameter Check

Parameter Check

NOTE: The parameter data registered in the VDCCM is shown on the display.
  1. Connect the Subaru Select Monitor III.
  2. On the «Main Menu» display screen, select the {Each System Check}.
  3. On the «System Selection Menu» display screen, select the {Brake Control}.
  4. Select the [OK] after {VDC} is displayed.
  5. On the "Brake Control Diagnosis" display screen, select {Parameter Check}.
  6. On the {Parameter Check} display screen, check that the applied model and grade of the target vehicle are included and select the [OK].
  7. If the applied model and grade of the target vehicle are not included on the {Parameter Check} display screen, perform parameter selection and registration. <Ref. to PARAMETER SELECTION , OPERATION, Subaru Select Monitor.>
scientia non olet · About LEMON Manuals