LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Outback Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Wiper/Washer Systems >> Washer System & Wiper System >> Combination Switch (Wiper) >> Removal

Combination Switch (Wiper): Removal

  1. Disconnect the ground cable from battery.
  2. Remove the driver's airbag module. < Ref. to REMOVAL , Driver's Airbag Module. >
  3. Remove the steering wheel. < Ref. to REMOVAL , Steering Wheel. >
  4. Remove the screws and remove the steering column covers (upper & lower).
    Fig 1: Locating Steering Column Covers Screw
    G05022834Courtesy of SUBARU OF AMERICA, INC.
  5. Disconnect the connector from the combination switch.
  6. Remove the three screws, and pull out the combination base switch assembly.
    Fig 2: Locating Combination Base Switch Assembly Screws
    G05022522Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the screws which secure the switch, then remove the combination switch.
scientia non olet · About LEMON Manuals