Front Oxygen (A/F) Sensor: Installation

Before installing front oxygen (A/F) sensor, apply anti-seize compound only to the threaded portion of front oxygen (A/F) sensor to make the next removal easier.
CAUTION: Never apply anti-seize compound to the protector of front oxygen (A/F) sensor.

Anti-seize compound:

NEVER-SEEZ NSN, JET LUBE SS-30 or equivalent
Install the front oxygen (A/F) sensor.
Tightening torque:

30 N.m (3.1 kgf-m, 22.1 ft-lb)

Fig 1: Locating Oxygen (A/F) Sensor And Exhaust Pipe Cools
Courtesy of SUBARU OF AMERICA, INC.
Install the under cover.
Lower the vehicle.
Affix the front oxygen (A/F) sensor with the clip.

Fig 2: Identifying Front Oxygen (A/F) Sensor Harness
Courtesy of SUBARU OF AMERICA, INC.
Connect the connector of front oxygen (A/F) sensor.

Fig 3: Locating Front Oxygen (A/F) Sensor
Courtesy of SUBARU OF AMERICA, INC.
Connect the battery ground cable to the battery.

Fig 4: Identifying Battery Ground Cable

Courtesy of SUBARU OF AMERICA, INC.