LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Impreza WRX STi >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DOTC) >> Engine Coolant Temperature Sensor >> Removal

Engine Coolant Temperature Sensor: Removal

  1. Disconnect the ground cable from the battery.
    Fig 1: Identifying Battery Ground Cable
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  2. Remove the generator. <Ref. to REMOVAL , Generator. >
  3. Drain engine coolant. <Ref. to DRAINING OF ENGINE COOLANT , REPLACEMENT, Engine Coolant.>
  4. Disconnect the connectors from the engine coolant temperature sensor.
    Fig 2: Identifying Engine Coolant Temperature Sensor
    G04997335Courtesy of SUBARU OF AMERICA, INC.
  5. Remove the engine coolant temperature sensor.
scientia non olet · About LEMON Manuals