LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Impreza WRX STi >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (H4DOTC) >> Camshaft Position Sensor >> Removal

Camshaft Position Sensor: Removal

  1. Disconnect the ground cable from battery.
    Fig 1: Identifying Battery Ground Cable
    G05019586Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect the connector from camshaft position sensor RH.
  3. Remove the camshaft position sensor RH from the rear side of the cylinder head.
    Fig 2: Locating Camshaft Position Sensor RH
    G05017802Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the cam shaft position sensor LH in the same way as RH.
scientia non olet · About LEMON Manuals