When Using Piano Wire

Remove the front pillar trim RH, and disconnect the wiper deicer connector. (Model with wiper deicer)
Remove the cowl panel. <Ref. to REMOVAL , Cowl Panel . >
Remove the glass molding.
Tape the body side of the circumference of windshield glass for protection.
Make a hole in the adhesive part using drill or cutter knife.
Pass the piano wire through the hole, and attach both the wire ends securely to pieces of wood.

Fig 1: Removing Roof Molding And Upper Front Molding
Courtesy of SUBARU OF AMERICA, INC.
Pull the wire ends alternately to cut off the adhesive part.
CAUTION:
- Do not tightly pull the piano wire against the windshield glass edge.
- Be careful not to damage interior and exterior parts.
- When removal is made with area close to instrument panel, place a protection plate over it. Pay particular attention to the removal.
- Do not cross piano wires. Otherwise they may be cut.