Select Lever: Disassembly

Remove the packing.
Remove the grip.
Remove the indicator light, and then remove the indicator cover.
NOTE: Be careful not to damage the indicator light during removal.

Fig 1: Identifying Indicator Light, Indicator Cover And Grip
Remove the blind.
Remove the cover.

Fig 2: Identifying Clip And Cover
Remove the clips and then remove the guide plate.

Fig 3: Identifying Guide Plate And Clips
Remove the clamp and remove the shift lock solenoid.

Fig 4: Identifying Shift Lock Solenoid And Clamp
Remove the bolts which secure the lock plate B.

Fig 5: Locating Lock Plate Bolts
Remove the lock plates A, B, and C and the bushing.

Fig 6: Identifying Lock Plates And Bushing
Remove the cushion plate.

Fig 7: Identifying Cushion Plate
Remove the "P" range switch.

Fig 8: Identifying "P" Range Switch
Remove the grommet and then extract the spring pin.

Fig 9: Identifying Spring Pin And Select Lever Arm
Remove the select lever arm and then remove the select lever COMPL from the plate.

Fig 10: Identifying Select Lever Arm, Select Lever COMPL And Plate
Remove the detent spring and remove the detent arm.

Fig 11: Identifying Detent Spring And Detent Arm
Remove the select lever COMPL bushing from bracket.

Fig 12: Identifying Select Lever COMPL Bushing And Bracket
Remove the bracket from select lever COMPL.

Fig 13: Identifying Select Lever COMPL And Bracket
Remove the bushing from the bracket.

Fig 14: Identifying Bushing Bracket