LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester XT, Standard >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> A/T & M/T Control Systems >> Select Lever >> Assembly

Select Lever: Assembly

  1. Clean all the parts before assembly.
  2. Apply NIGTIGHT LYW NO. 2 grease or the equivalent to each part. < Ref. to AT SELECT LEVER , COMPONENT, General Description .>
    CAUTION: Apply grease [SUNCALL GLO-244] to the axle of lock plate.
  3. Assemble in the reverse order of disassembly.
  4. After completion of fitting, transfer the select lever to the "1" range from "P" range, then check whether the select indicator and select lever match, and whether the pointer and position mark match and check the operating force.
scientia non olet · About LEMON Manuals