LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester XT, Standard >> Repair and Diagnosis (Single Page) >> Brakes >> Traction Control >> Abs - Vehicle Dynamics Control (VDC) System >> ABS Sequence Control >> Specification >> Conditions For Completion Of Abs Sequence Control

Conditions For Completion Of Abs Sequence Control

When the following conditions develop, the ABS sequence control stops and ABS operation is returned to the normal mode.

  1. When the speed of at least one wheel reaches 10km/h(6MPH).
  2. When the brake pedal is released during sequence control and the stop lamp switch is becomes OFF.
  3. After completion of the sequence control.
  4. When a problem is detected.
scientia non olet · About LEMON Manuals