MT Gear Shift Lever: Removal

Set the vehicle on a lift.
Remove the gear shift knob.
Disconnect the ground cable from the battery.
Remove the console box. < Ref. to REMOVAL , Console Box . >
Remove the clamp.

Fig 1: Identifying MT Gear Shift Lever
Remove the bushing and insulator assembly.

Fig 2: Identifying Bushing And Insulator Assembly
Remove the plate assembly from the vehicle body.

Fig 3: Identifying Plate Assembly Of Vehicle Body
Lift up the vehicle.
Remove the rear exhaust pipe and muffler.
- Non-turbo model
  < Ref. to REMOVAL , Rear Exhaust Pipe . > < Ref. to REMOVAL , REMOVAL, Muffler . >
- Turbo model
  < Ref. to REMOVAL , Rear Exhaust Pipe . > < Ref. to REMOVAL , Muffler . >
Remove the stay from transmission bracket.

Fig 4: Identifying Transmission Bracket And Stay
Remove the rod from joint.

Fig 5: Identifying Stay And Rod
Remove the cushion rubber from vehicle body.

Fig 6: Identifying Cushion Rubber And Stay
Remove the spring pin, and then extract the joint.

Fig 7: Identifying Spring Pin And Joint
Lower the vehicle.
Remove the lever COMPL.

Fig 8: Identifying Lever COMPL