LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2008 >> Forester XT, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 4AT (Diagnostics) >> Diagnostic Procedure for Subaru Select Monitor Communication >> Communication For Initializing Impossible >> Notes

Communication For Initializing Impossible: Notes

NOTE: If the AT OIL TEMP warning light turns on when the Subaru Select Monitor or general scan tool is connected, perform the following procedures.
  1. Disconnect the Subaru Select Monitor or general scan tool from the vehicle.
  2. Repeat the ignition switch ON-OFF cycle three times.
  3. Turn the ignition switch to ON.

If the AT OIL TEMP warning light turns off, the Subaru Select Monitor or general scan tool may be faulty. Connect a different Subaru Select Monitor or general scan tool, and if AT OIL TEMP warning light remains off, delete the DTC.

scientia non olet · About LEMON Manuals